Thank you, RollsRoyce. The output data indeed has a 1nm interval. What I'm unsure about is whether the instrument's spectral bandwidth of 5–8nm meets the requirements. If it is acceptable, I'd be happy to share the spectra I can measure.

As above, the reporting is 1nm
The measurement bandwidth is 5nm, or lower, depending on model.
Weirdly, the TOPCON SR-UL2 model specifies 5 to 8nm.

But yes, it is still worth providing Corr. File data from such a spectro.

Steve

Thank you Steve. Now that I know it meets the requirements, I'll upload and share the measured spectrum.

Correlation Files for Calibrite/X-Rite Colorimeters (24 February 2025 Update)

Added the following spectral correction (KarlKlammer took the measurement, thanks!):

JVC DLA-NZ500 (Laser Projector - Laser 100) - Qalif Spectro 1.8nm

Instructions

Download Link: ColorChecker-i1D3 Spectral CVS Files (24 January 2025)

ChihHuangLin
Oops! Looks like I misinterpreted the limited specs on that chart...

Here are two additional files for the next update.
Measurements were taken with a Qalif Spectro for the JVC DLA-NZ700 Projector with colour filter on and off.
https://magentacloud.de/s/5ybPWBR6BRajTRK

Cheers Karl.
Much appreciated.

Steve

Correlation Files for Calibrite/X-Rite Colorimeters (28 February 2025 Update)

Added the following spectral corrections (KarlKlammer took those measurements, thanks!):

JVC DLA-NZ700 (Laser Projector - Laser 100 - Filter Off) - Qalif Spectro 1.8nm
JVC DLA-NZ700 (Laser Projector - Laser 100 - Filter On) - Qalif Spectro 1.8nm

Instructions

Download Link: ColorChecker-i1D3 Spectral CVS Files (28 January 2025)

I would like to provide the ASUS PA32UCR-K (Mini LED) Correlation File, measured with the UPRTEK MK550T 9nm.
https://lightillusion.com/forums/shared_files/storage/Colour_Spaces/asusfpa32ucr-k.zip

Correlation Files for Calibrite/X-Rite Colorimeters (14 March 2025 Update)

Added the following spectral corrections (ChihHuangLin took that measurement, thanks!):

ASUS PA32UCR-K (QD-Mini-LED AHVA IPS) - UPRTEK MK550T 9nm

Instructions

Download Link: ColorChecker-i1D3 Spectral CVS Files (14 March 2025)

Correlation Files for Calibrite/X-Rite Colorimeters (18 March 2025 Update)

Added the following spectral correction:

EIZO ColorEdge CG2700X (W-LED)- Colorimetry Research CR-250 4nm

Instructions

Download Link: ColorChecker-i1D3 Spectral CVS Files (18 March 2025)

Correlation Files for Calibrite/X-Rite Colorimeters (29 March 2025 Update)

Added the following spectral correction:

FSI XMP270 (Gen3 QD-OLED) - Colorimetry Research CR-300 2nm

InstructionsInstructions

Download Link: ColorChecker-i1D3 Spectral CVS Files (29 March 2025)

Does anyone (following this topic) happen to have a Panasonic Z85A, has the equipment and can provide a correlation file for the display?

SonyXP
It's a non-MLA WOLED akin to the LG G4, according to RTINGS. Try the correlation file for that display.

Hey, thanks for the reply The G4-Series OLED panels do use MLA, the C4 doesn't. I tried to use the CX correlation file, aswell as the WOLED sample file. Both produce quite the same result in terms of deltaE. However, the Z85A (to my eyes) comes with a bluish/reddish tint, which I can't seem to correct this way. So it's either my perception or the limitation of this "budget" calibration solution, using an i1D3. Wanted to try a proper Z85A correlation file, if available - to see, if there's any kind of difference