NebulaUKThis is pretty close to the approach I've settled on after quite a bit of testing with my TCL QM7K.
I start by finding the largest window that still maintains essentially the same peak luminance as a smaller window on black. On my 75" QM7K with LD set to Medium, that was around 16%, though I imagine this will vary with panel size, model, firmware, etc.
Once I've established that baseline, I gradually raise the background from black, just enough to keep the surrounding dimming zones engaged, while checking that peak luminance remains close to the original measurement. The idea is to keep the backlight active without introducing enough additional screen loading to significantly suppress peak brightness. This is for HDR where I calibrate directly against PQ as well as for DV where I use DV Calibrate. For SDR I still follow the tried and true, LD off, full field, then enable LD to Low for viewing. Has held up well in content... well, as well as to expect for a TCL FALD

I've also been experimenting with a Python passthrough using ColourSpace's Network Server to calculate dynamic background RGB values based on each measurement patch, essentially creating a constant-APL-style pattern.
Obviously, none of this eliminates the inherent variability of TCL's local dimming, but I'm finding this has translated pretty well to real content and a pleasing image overall.