I have the superior HTP license and madvr extreme, with the latest envy update even the environment variant does not let me install the old 3dluts

If you have the new madVR firmware but the old dll within ColourSpace, I guess that won't work...

Steve

To load the 3dlut created on 01/27/26, I had to downgrade Envy to be able to load it! With the latest Envy update, the version that was advertised as a bug fix, it didn't let me load the 3dluts correctly.

Yes, as you do not have the new dll that madVR have also fixed... as has been said.

Steve

Steve We don't understand each other, if I use the latest version of madvr envy and I eliminate the environment variation, it doesn't load any 3dlut! If I create a 3d lut from the beginning it takes 5/6 hours and it doesn't even finish it! If I use an old 3dlut but I convert it to 256 after 4/5 hours it still hasn't loaded! My PC is an i5 with only the colorspace program and the Vnc for trinnov, even with the help of Enrico Erb999, he set it to have the best performance, so I don't know what to say

Do you have the new dll too?

Steve

Steve Yes, I have updated both Envy and Colourspace to the latest version, which should be 2245 of 18/01

No, that means you DO NOT have the new madVR dll, as has been stated in previous posts in this thread.
It is something madVR should have said when they released the new Envy firmware.

Steve

Steve in the released dll it is written that it fixes the 256 lut

No - you need the madVR dll for use within ColourSpace...
That is a madVR provided dll - see the previous discussions in this thread.
It is unfortunate madVR have not provided that information with their firmware release!

Steve

Steve I don't know where to find it! Anyway, when things are a little clearer I'll see if it's worth changing my PC and installing it! I wasted half a day for nothing.

You will need to ask madVR for it, as Fabio has done...
But when the next update for ColourSpace is released it will be included as standard.
However, all this is a madVR issue, and not ColourSpace.
You should discuss with them.

Steve

Ok thanks

That the Upload freezes at 80% is fixed with the new dll but after numbers of test with Mathias we can confirm that it is indeed a ColourSpace bug. When using the native 256^3 LUT option without ENV variable active one of the 3D LUT channels seems to be broken. When you upload a LUT all colors are desaturated. Mathias confirmed that and can replicate that issue on his side.

Again, please test with madVR HTPC, as we have tested via that.
Envy should be exactly the same as madVR HTPC.

Steve