| Forums | Search | Statistics | Polls | File Bank | 
 ∅ ?  
You must be logged in to post content on this forum.
Display Calibration Light Illusion Forums / Display Calibration /  
 

ASUS PA27UCDMR and Similar Blue Point and possible LUT Bug

 
Author paulinventome Male
ZRO

#1 | Posted: Yesterday 14:18 
Hi,

I added this as a new post because it might be about all the ASUS ProArt OLEDs but I don't know yet.

First thing though Steve if you're reading - I did a profile using a Body Centre Cube and a standard Cube. When creating a LUT the Body Centre Cube produced just noise but the normal cube worked fine. Looks like the body centre isn't an expected type?

Anyway main point is that the OLED can't reach the blue primary of 709/P3, it's close but not quite there. This is checking with a i1Pro 2 and a ColourChecker. I understand that the blue wavelength is quite narrow on these OLEDs and there's a chance that these tools aren't reading correct. But the other primaries are fine, just blue. Is this a known thing, is there any chance that I've got the monitor set weird (I've been through everything and cannot find anything wrong on it)

I've googled but this hasn't come up - so I am wondering if I am missing something here?

Kindest
Paul

Author Steve Male
INF

#2 | Posted: Yesterday 14:24 
No, there is no issue with BCC profiling and LUT Generation, so that is a problem elsewhere.
That is something you will need to look into yourself.
And it is common for OLEDs of all types to not be able to quite make 100% primary blue.
But, using an i1Pro will likely exasperate the issue.

Steve
Steve Shaw
Mob Boss at Light Illusion

Author paulinventome Male
ZRO

#3 | Posted: Yesterday 16:43 
Steve

Overall the calibration is much better than factory, just a little shadow issue (I may profile again with more integration time in the shadows I was really just seeing if this worked). You can see the Blue just not tracking, but visually it looks good. Some odd kinks in the cube but they show as green. Overall pretty happy with the display.

709

I will try the BCD and CUBE again but it was as simple as doing the profile twice and trying it - one produced the above and the BCD just showed a LUT of noise - as if the points were mismatched between the two. But if you say it should work then must be something here.

Cheers
Paul

Author Steve Male
INF

#4 | Posted: Yesterday 17:02 
You would need to post the pre-cal profile and the post-verification to get any viable feedback.
(And the BCC one, to see why the LUT was bad.)

Steve
Steve Shaw
Mob Boss at Light Illusion

Display Calibration Light Illusion Forums / Display Calibration /
 ASUS PA27UCDMR and Similar Blue Point and possible LUT Bug

 

 
Online now: Guests - 1
Members - 2 (hidden: 1) [ twitt88 ]
Max. ever online: 380 [24 Mar 2026 21:54]
Guests - 380 / Members - 0