LG G5 3D LUT Upload doesn't match Active LUT?

ConnecTED · 2026-10-14T10:16:16+0000

In this case, HDR does not support 'whiter than white' (WTW), and the 100% White is set at 10,000 nits. With the television contrast set to 100, no extended range is available; therefore, the LEGAL setting must be used. For SDR you have to use Contrast 85. (or lower if required) For HDR you have to use Contrast 100.

You must be logged in to post content on this forum.

	Light Illusion Forums / Display Calibration /
	LG G5 3D LUT Upload doesn't match Active LUT?
	Page 2 of 2 : « Previous 1 2

	ConnecTED CAL	#16 \| Posted: 14 Oct 2026 10:16
		Blue A10: This is all good to know; is it also the case for HDR or just SDR? I probably should've mentioned before that all this is happening with HDR. I apologize for that as well, and thank you both for your replies. In this case, HDR does not support 'whiter than white' (WTW), and the 100% White is set at 10,000 nits. With the television contrast set to 100, no extended range is available; therefore, the LEGAL setting must be used. For SDR you have to use Contrast 85. (or lower if required) For HDR you have to use Contrast 100.

	ConnecTED CAL	#17 \| Posted: 14 Oct 2026 10:23
		calme420 When you use other settings for Contrast/Brightness/Color/Tint from the defaults, the 1D LUT will become misaligned, so in that case, you have to use only a 3D LUT. Also, after loading any LUT, you must leave all TV settings untouched.

Page 2 of 2 : « Previous 1 2

	Light Illusion Forums / Display Calibration /
	LG G5 3D LUT Upload doesn't match Active LUT?