I've been reading up on the TCL 3DLUT calibration capabilities but can't wrap my head around how I export the proper file format.
"After profiling, Calibration 1D and 3D LUTs can be generated as normal within ColourSpace LUT Tools." I don't see any issues with that but when I want to export the LUT files I can't find TCL format under LUT Export Selection. I can't figure out how to export the DV configuration file either

EDIT: I have a LTE license.

Ah - it seems we have an error in the licensing for TCL.
We'll have to look into that.

Steve

Ok - the next ColourSpace release will have a fix for the incorrect licensing for TCL Export.
It was a drop-off on our part.

Steve

Thank you for the swift response!

Hi,
is there somebody who calibrated TCL C655?
I need some help ...

cheers

All TCL TVs calibrate the same way.
What's the issue?

Steve

Hi Steve,
I have no issue yet
I am going to prepare for my friend's TCL display, and because I will do this at his home I won't too much time to invent anything.
I am complete amateur as for calibration, though I calibrated a few LG displays with quite good results.
I did it because I have brillant procedures and many advices from Ted.

There is no such procedures for TCL, only your guide is what I have.
My main problem is how to prepare a proper workflow for SDR/HDR/DoVi calibration.

I use PGen4, i1D3 colorimeter and CS HTL
For SDR I am going to do as below:
set proper black/contrast and peak white
upload reset 1D and 3D LUTs
use legal, profile with grayscale large, do 1DLUT and upload to 1D slot
profile with 17p cube, do 3DLUT and upload to 3D slot

I suppose that is good way.
But what about HDR/DoVi?

should I use similar/the same procedure as for LGs?

cheers

You should do the Black/White settings after the reset LUTs upload.
Other than that, you should just follow the TCL User Guide.
There's really not a lot more to it.

Steve

OK, thanks for info.
I will try ...