Hi,

I'm trying to use the Image Sequence Probe for the first time, but I can't seem to get it working properly.

I've read the manual, but I'm still missing something. I must be doing something wrong here.

Here is what I'm doing:
· I loaded a custom CSV into the Characterisation window.
· When I use the Virtual Probe, all patches appear correctly in the graphs after loading.
· However, when I switch to the Image Sequence Probe and load my image sequence (patch%06d.dpx), no points appear in the graphs during or after the load process.
· The image sequence status turns green and indicates that it's loading correctly.
· Offset is set correctly (sequence starts at 000001).
· Step is set to 1.

But no measurement points are generated — nothing appears in the graphs.

It feels like the sequence is recognised, but no actual measurements are being triggered.

Am I missing a required step to initiate the measurement process when using Image Sequence Probe?

Any help would be greatly appreciated.

Thanks!

What are the images labelled as exactly, and what is the text string you are using in full?
And what is the .csv?
And make sure you have Patch Sequence Sorting disabled, so the .csv list order is used.
Also enable Tangents so you can see if the measurements are just not where you expect them to be.

If you still have issues, host the image patches and the .csv somewhere so I can download to test.

Steve