Eizo ColorEdge CS2400S - measurement / Correlation Files question

Hello!
I have Eizo ColorEdge CS2400S monitors and Calibrite Display Pro colorimeter. I would like to take measurements using Colourspace ZRO. After selecting the probe type (ColorChecker/Display/i1D3) I do not know what type of matrix to choose in 'Correlation Files for Calibrite/Xrite Colorimeters'. This is IPS Wide gamut Led (and having the Spyder X2 elite colorimeter I had this type of matrix to choose from) but here I do not know. In the 'Correlation Files' file there is no exact monitor model. Obviously, incorrect selection = incorrect results.
Can you suggest what to do in this situation?

Thank you!
Rafal

You would need to know the backlight that monitor uses.
But likely PFS Phosphor would be the best choice.
But, Corr. Files really are not accurate - check the posts on using SDP2Matrix to verify.

Steve

Thanks Steve,
the closest one seems to be the file "EIZO ColorEdge CS2731 (W-LED PFS) - Colorimetry Research CR-300 2nm". But I'll check the parameter you're talking about.
P.S. The program for measurement is fantastic!